The Ford Capri Laser Page

Ok thanks for the reply I’ve no idea if it’s got a connection for a iPod. Ive took a better picture this time. How do you bench test it.
https://flic.kr/p/2amJqNT

Hi thanks for the help. https://flic.kr/p/MZ95UD
Hopefully the link works mines is slightly different.

Hi does anyone know how to wire a p21 radio there’s spade connections on the back but don’t know what is live or ground. Thanks

Hi thanks for the post it ended up being the battery it started with a jump start and been alright since.

Hi I was putting the starter motor back in but never disconnected the battery. Now am hoping I’ve blown as nothing works now. I’ve checked the fuses in the car and they were fine. There’s also 3 fuses 60amp ones in a separate fuse box connected to the battery. Any ideas what other cars these fuses m...

Thanks for the info and links.

Has anyone got a 1.6 cvh engine for sale. Thanks

Hi is anyone selling a 2.0 pinto engine. Thanks

Brilliant thanks for everyone’s help.

The belt is about 1mm away from the edge of the tensioner bearing is this ok thanks.

Got the belt tensioned now thanks. I’ve still got a problem that the belt moves forward on all the pulleys. When it’s started up don’t if this is ok or not.

Hi I’ve changed the timing belt and tensioner with a QH kit. But the belt seems to slack. The engine runs ok but If wanted to I could pull the belt of the tensioner. Any help thanks

Hi I bought a new clutch kit from burtons. When trying to get the old release bearing off I had twist it with grips to get it off. The new one looks the same as the old one so I tried it on before fitting the clutch fork and the same problem doesn’t want to come off and I ended up breaking the tabs ...

Timing sorted now thanks.

Hi just changed the timing belt everything lined up before the belt got changed. But when I turned the engine over by hand I never tighten the belt tensioner down so think belt has slipped. Now the dizzy and moon and mountain line up but the crank pulley is out what will I do now. Thanks

Thanks for the reply’s I ended up hitting a 19mm socket on and it came no problem.

Hi Tried molegrips still wouldn’t move. Thanks

Hi the spline part of the timing belt tensioner has been rounded off. Any ideas how to get it off. Thanks

Hi It’s the cover that goes between the engine and gearbox not sure what it’s called. Thanks

Hi am needing the dust cover for type 9 pinto. Thanks