The Ford Capri Laser Page

sorry rear anti roll bar.

In addition do you know if the forged end joints have to be altered after fitting poly bushes from the standard ribber bush?

cheers

Hi

Can anyone confirm which way around the bush goes, as there is a thicker ridge to one end?

WINNER i have result, i have wire brushed a round the pin and soaked in WD40, knocked pin and washer out now left with a 25mm hole approx in the axle plate. The lowering block washer hower seems smaller than the axle plate recess hole. Can anyone confirm how the block fit and where the pin and washe...

ok il give it a go. the pin spins freely (not clear on photo) and i just squeezed a spanner on the bolt head (on top of the saddle plate) to hold it, so that i could undo this from the spring. As you said i thought the u bolts coming off would release the axle from the spring, but with all u bolts o...

Please see photos

Hi All, I am trying to install 1" lowering blocks to the rear of my 2.8i. Easy i thought, however i have a pin approx 50mm long installed within my existing welded axle spring plate (to go through original single leaf spring). Also the nib diameter on the lowering block is larger than my leaf s...