The Ford Capri Laser Page

Rewired a new connector on but didnt do anything just checked all earths today ones under bonnet and the ones i can find inside ive figured out its deffitnely fuse 1 thats shorting somewere checked all cables on storks interior light connections cig lighter connections all good bothing that coudl ca...

Anyone have any experience with the Maxxis Victra MA-510E's?? Just bought a set of 7J pepperpots with slicks on and I'm struggling to find some road legal tyres! I ad the same issues finding some coudk inly find summer tyres at a decent price so went for the maxxis 185/60/13 on front 205s rear had ...

So after a busy weekend still no look checked all connections under the bonnet all good cleaned them all up sprted a cable goig to the battery that was on its last strand chaned all fuses and even replaced the fusebox forna bice clean one and its still the same although after reading some info all t...

Sounds like its could be the fuse box then going to hbe a good dig round this weekend and give everything a good clean up and check earths the loom is abit of a mess numerous additions tonit so think ill have to untaoebit all and check it all out. Probably the kast job before the winter. Cheers

So after lots of peoples help the capris nearly finished. Just to source a mk 2 front bumper. Few electrical issues now horn does not work no power even going to it and front screen wash motor works tested it power going through cable to it but nothing at stork just like horn replaced both storks st...

Thanks guys I've found the holes at the rear that have been welded up so I'm going to have to drill those through. And found some brackets on ebay hoping it should be on by the end of month I hope

Don't think I have the no how to do the Rear end lol. Just new springs is the best hope for me really lol. Have you notice much differenvelope in vibration with the poly bushes that's the main thing I was looking at them for.

Thanks mate had a look in the boot can see were the old holes have been filled. I've had a look about at some brackets and the only ones I can find look like guttering brackets that's the only thing I can think of that loos the same lol. I'm assuming these are the ones in need and the bolts that go ...

The guy I got my mk 3 off as welded up all gaps and holes for bumper fittings on the rear I've manages to get a mk 2 chrome bumper for the rear but it comes without any fixings anybody have any advice on what fixings I need and idealy what I need to be cutting back out planning on fitting it without...

Not looked at them tbh heard about them fitting. looked at some wilwood calipers. I've had single leafs on drive is moderately better lol. Think the only thing I can do now is shocks and poly bushes other than simply big rear end upgrades. Read a few post about fitting issues with generic no branded...

That was my thoughts with the brakes already have 245 discs just need to upgrade to some 4pots with some braded hoses and recon that's the best I can get really. I've looked at some gaz rear adjustable's which are reasonable in price but the front's are just too expensive really. The Bilsteins I've ...

Well after my last posts I've now got my carb's all running fine and engine sorted now it's on to suspension and brake upgrades I've already fitted 2.8 vented discs with spacers for calipers some difference not a lot looking at adding some 4 pot calipers with breed hoses with the hopes that will hel...

Sorry about the late response I've not been getting up dates . I've spoken to rally equip in Bury and they've explained what's you've just said incorrect setup or jets venturi etc and recommend a choke fitting definitely makes me think it's that now after 2 people have said the same. Thanks got it b...

Hi all 1st and foremost I'm a new member and just purchased my dream car a mk 3 capri. It's a 2.0 with a fr32 cam and dellorto twin 40s. The car drives great not an issues when runing but does not idle well at all and starting is a nightmare i understand its a art to start one it does not have choke...