Search found 40 matches
- Fri Aug 25, 2017 12:23 pm
- Forum: Q & A
- Topic: Starting issue
- Replies: 26
- Views: 8199
Re: Starting issue
Hi Lads, Just to update you, I removed the WUR and took it into work (hospital) we have an electronics engineering dept, we stripped the wur and tested the bi metal strip it was ok, checked the diaphragms all ok, we then re assembled it and pressure tested it cold and hot and it appeared to work ok,...
- Thu Aug 17, 2017 8:41 am
- Forum: Q & A
- Topic: Starting issue
- Replies: 26
- Views: 8199
Re: Starting issue
Hi Lads, Just to update you, I removed the WUR and took it into work (hospital) we have an electronics engineering dept, we stripped the wur and tested the bi metal strip it was ok, checked the diaphragms all ok, we then re assembled it and pressure tested it cold and hot and it appeared to work ok,...
- Thu Aug 17, 2017 8:36 am
- Forum: Q & A
- Topic: Starting issue
- Replies: 26
- Views: 8199
Re: Starting issue
Sorry posted on wrong thread
- Thu Aug 17, 2017 8:35 am
- Forum: Q & A
- Topic: Starting issue
- Replies: 26
- Views: 8199
Re: Starting issue
Hi Lads, Just to update you, I removed the WUR and took it into work (hospital) we have an electronics engineering dept, we stripped the wur and tested the bi metal strip it was ok, checked the diaphragms all ok, we then re assembled it and pressure tested it cold and hot and it appeared to work ok,...
- Wed Jul 26, 2017 8:08 am
- Forum: Q & A
- Topic: Starting issue
- Replies: 26
- Views: 8199
Re: Starting issue
Thanks all, very much appreciated, I will let you know what I find.
- Tue Jul 25, 2017 1:03 pm
- Forum: Q & A
- Topic: Starting issue
- Replies: 26
- Views: 8199
Re: Starting issue
Thanks all, I have to check out the reg and relay will let you know, much appreciated.
- Tue Jul 25, 2017 11:57 am
- Forum: Q & A
- Topic: Starting issue
- Replies: 26
- Views: 8199
Re: Starting issue
Thanks Paul G, Do you happen to know where the impulse relay is ?
- Tue Jul 25, 2017 9:53 am
- Forum: Q & A
- Topic: Starting issue
- Replies: 26
- Views: 8199
Re: Starting issue
Thank you very much for your help Ollyw, I will check it and let you know, the emissions were fine, past mot with no problems.
- Tue Jul 25, 2017 8:02 am
- Forum: Q & A
- Topic: Starting issue
- Replies: 26
- Views: 8199
Starting issue
Hi all, If I could pick your knowledgeable brains please, I have a 1986 2.8i which has always started first time, however on Monday last had to take if for an MOT and it wouldn't start, I checked the usual suspects spark at the plugs etc. anyway I removed the cold start injector to see if fuel was g...
- Mon May 25, 2015 11:09 am
- Forum: Q & A
- Topic: Thermotime switch
- Replies: 2
- Views: 1328
Re: Thermotime switch
Cheers Andrew, I will see if mine will undo ,if not will try something else.
Best regards
Tony
Best regards
Tony
- Mon May 25, 2015 8:38 am
- Forum: Q & A
- Topic: Thermotime switch
- Replies: 2
- Views: 1328
Thermotime switch
Hi all, I wanted to fit an extra temperature gauge to my 2.8i and was thinking of using the thermotime housing which has a allen type grub screw next to the existing temperature probe, has anyone undone this screw ? as I don't want to undo it and found I've buggered the coil inside.
Many Thanks
Many Thanks
Re: speakers
Many thanks, for the advise I will try to get some.
speakers
Hi all, I have a 2.8 and want to replace the door and rear speakers for modern units but don't want to have to cut anything, does anybody know of speakers I can buy which are about the same dimensions as the existing ?
Many Thanks
Many Thanks
- Fri Sep 12, 2014 5:55 pm
- Forum: Projects and Restorations
- Topic: The Ultimate Fuel Gauge Sender Fix / Resto!
- Replies: 28
- Views: 22508
Re: The Ultimate Fuel Gauge Sender Fix / Resto!
Well done mate very impressed !
- Fri Sep 05, 2014 5:55 pm
- Forum: Q & A
- Topic: Pattern part front wings
- Replies: 13
- Views: 4830
Re: Pattern part front wings
I have bought 2 wings one I think from capri club and the other from Tickover £109.50 it was a real headache fitting both of them , had to do extensive work , welding etc to get them to fit.
- Sat Jan 25, 2014 4:38 pm
- Forum: Q & A
- Topic: 2.8i help please
- Replies: 2
- Views: 1118
Re: 2.8i help please
if you give me your email addy I will scan and forward any info from the capri workshop manual, for the loom (if any ) to you.
- Thu Jan 23, 2014 6:39 pm
- Forum: Q & A
- Topic: Capri 2.8i No 12v power to lights/ indicators etc.
- Replies: 4
- Views: 1790
Re: Capri 2.8i No 12v power to lights/ indicators etc.
I found the square fuse holder/relay to the rear of the engine on the bulkhead I think holds the fuses for the headlights, Its held on with self tappers I removed it, took out the old corroded fuses cleaned up the contacts and put new fuses in , worked a treat.
- Fri Jan 10, 2014 6:08 pm
- Forum: Projects and Restorations
- Topic: Urgent Help Needed!!
- Replies: 26
- Views: 9055
Re: Urgent Help Needed!!
Don't get down mate i hadn't done any mig welding but kept trying with different machine settings till i was confident to start on the car, you need to get some 1mm thick mild steel and practice , practice and more practice read some of the mig forums, you will get it in the end, take it a step at a...
- Sun Jan 05, 2014 7:50 am
- Forum: Q & A
- Topic: Sun roof mechanism
- Replies: 5
- Views: 2515
Re: Sun roof mechanism
do you know for certain the cable has frayed ? as I know that the cams etc ( plastic ) can break causing the sunroof to stop working, I have spent many a happy hour !!!!!!!!!!!! figuring out how to set the mechanism up, finally done it .
- Thu Nov 14, 2013 6:10 pm
- Forum: Projects and Restorations
- Topic: Yes yet another black 2.8 refurb
- Replies: 4
- Views: 1955
Re: Yes yet another black 2.8 refurb
Cheers Dan