The Ford Capri Laser Page

Thanks to all that replied I got a repair kit from PAST PARTs.co.uk They will re slieve a master break cylinder if you require it Nigal a very helpful man
There is no servo on the car and one can not be fitted as clutch cable come out very closed to break cylinder

see photos it may help michael

unable to add photo its too large

The seals are worn in my master break cylinder ( I may not be calling it the correct name ) Is it possible to get a replacement kit or even a new unit the letters numbers are printed on the side of the unit G I RLING 625 and 64676727 up just undre the fluid contaciner can anybody help Michael

Hi e mail me at [email protected] so that I have your contact details Michael

Hi any member have any idea where I can purchase a set of stainless quarter bumpers to fit a MK 1 1973 facelift capri Michael ( Ireland ) 00353872654865

I have a 73 Facelift The carburetter has 4 air inlet ports and on top of each of the ports is 4 small rubber pipe going back down between the inlet ports and are joined together When I first purchased the car this pipe was connected to a pressure guage What is the purpose of these 4 pipes and where ...

Mr B thanks for your advise michael

Hi I am back again for more help the catch which closes the rear fly window has come away from the glass what do I use to restick it Will super glue work michael

Thanks for your reply and advise did not think of pouring oil over cam.

One was fitted to my mk1 facelift when I purchased it it caused a lot of problems car used to stall and took hours to restart took it off and fitted a standard pump worked of the crank shaft no problems since

Thanks for your help

Hi all I have a 1973 mk 1 facelift with a 2,000 block over head cam it has been parked up for the past 8 years and not driven while i am restoring it question is where can i purchase a timing belt is it possible to get one in ford garage any idea where i can purchase one many thanks to members who h...

Any idea where I can purchase a time clock for a 73 facelift capri to fit in consul 05353872654865 michael

Any idea where I can purchase a pull cable to open the bonnet of a 1973 mk 1 capri facelift ml

Hope to take them off and send them to Steadspeed restoration in Scotland. Spoke to owner who will restore them

Andrew Many thanks for your help ml

I know I asked this before but I can find where I recorded the answer I am having trouble starting my 73 facelift Its an ignition problem can any one recommend a good quality Electronic ignition and where can i purchase it Michael

Thanks Just need to know for when I take it to body show thanks again

Good joke I am the owner and need to remove them in order to re fabricate round the head lights and check for other rust spots any ideas ???